| LQ1200型輪胎切割機 | ||||||||||||
| 用途： 將整條輪胎切割成胎冠、胎側和內圈。 結構與原理： 該機由機架、轉動機構、支撐架、刀具機構等組成。其基本原理為選擇輪胎內圈為支撐點，將內圈制于支撐架。經支撐架的調節機構將輪胎牢固地撐緊于支撐架；通過減速傳動機構獲得低速運轉；切割刀具安裝于機械臺面板，可根據需要任意進退刀。在輪胎低速運轉的同時移動刀具，切入輪胎，即可順利地將輪胎切開。為更順利的切割和刀具的冷卻，可配套水泵將冷卻水直射切割點。 技術參數：
Use：To cut the whole tire into tire crown、tire sidewall、tire bead。 Construction and Principle： The unit consist of frame，rotate mechanism， porp mechanism and knift mechanism。it's principle is that select the tire bead as a prop point and place it on porp mechanism，then adjust it to tightly。start the machine in low speed by slow down transmission part；knift is setted on the machinery panel and it can be forward and back at one's ease。Meanwhile the tire rotating in low speed， the knift cut into the tire to cut open it successfully。In order to cut the tire even smoothly and cool the knift，you can form complete set the water pump to inject water to the cutting point。 |
點擊圖片查看原圖
